If you have a faulty
1. Take out the
2. Remove the drive case from the XBox 360. Make sure you do this quickly and straight.
3. Detach the drive from the case using a screwdriver. After removing all the screws from the hard drive, remove the old drive. Make sure you keep the screws in a small tray to prevent them from getting lost.
4. Put the new drive into the case using the torx screwdriver. Insert the new hard drive into the XBox case with much care, make sure that you put it in a straight manner. This is because, if any pins are bent, the drive will become unusable.
Assuming the problem with the old drive was not as a result of physical damage, the old drive could be used as a an auxiliary.
5. Put back the console cover and switch it back on.
I hope that these few tips will help you solve the Hard Drive problems on your XBox 360 console. But in cases where it does not help, do not panic just get an XBox 360 repair guide. It contains guide lines that would help you fix the problem permanently.
No comments:
Post a Comment